Online shopping cloth bed installation steps

       Cloth soft bed is sought after by consumers because of its comfortable experience and changeable appearance. With the increasing popularity of online shopping, furniture online shopping is also rising, but many people are entangled in the installation cost is too expensive and dare not start, the following editor will share with you the tips of cloth bed installation with her own experience! Teach you to easily get a bed with a screwdriver, helping you save a lot of installation costs.

Tools / raw materials

Method / Step

1. 3

   3.Place the head of the bed against the wall, and place the side of the bed and the end of the bed on the ground according to the pictures on the website

   

    

2. 4

   4.Open the carton with hardware

   

   

1. 5

   5.Place triangle angle codes and four hole angle codes on the four corners of the bed.

   
   

2. 6

   6.Place the center hook on the middle of the head of the bed, the middle of the bed, and the middle of the foot of the bed

   

1. 7

   7.Place the foot of the bed on the floor at the end of the bed.

   

2. 8

   8.Place the hardware and row of skeleton feet in the middle of the open space

   

1. 9

   9.Take out the nut and use a screwdriver to fix the foot size to each corner of the bed

   

1. 10

    

   10.Tighten the screws on both sides of the bed with an electric drill or screwdriver to fix the corner code

   

1. 11

   11.Fix the corner of the bed with screws to the end of the bed

   

1. 12

   12.Fix the stainless steel foot to the big corner of the bed

   

1. 13

   13.Use a screwdriver to tighten the screws at the end of the bed to form the basic form of the bed

   

1. 14

   14.Unfold the cloth cover and cover it on the bed frame

   

1. 15

   15.Apply the cloth cover to each corner of the bed

   

1. 16

   16.Tighten the cloth cover next to the bed and press it tightly by hand

   

1. 17

   17.Tighten the cloth cover at the end of the bed to ensure that there is a cloth cover at the end of the bed, then squeeze firmly

   

1. 18

   18.Tighten the cloth cover at the end of the bed, especially the cloth cover at the corner of the bed

   

1. 19

   19.Tighten the cloth cover on the ladder tightly, there is no gap that does not affect the function or appearance, don't pay attention, because even professionals can't basically do it

   

1. 20

   20.Place the ladder at the notch, place the row of skeletons on the metal big foot size, and adjust the length of the row of skeleton feet, fix it on the row of skeletons

   

1. 21 one

   21.Place the big pillow on the head of the bed, place the mattress on the row of skeletons, and then put the quilt and pillow on. Duang ~ A beautiful bed appeared in front of us.

   

Precautions